WORK BENCH PLANS

  • A – 4 pieces of 2×4 lumber 29” long LEGS (This can be changed longer or shorter to suit your preference)
  • B – 4 pieces of 2×4 lumber 48” long SIDE STRETCHERS ( This can be changed longer or shorter to suit your needs) You should be 6 inches longer then longest piece that’s going to be on your bench.
  • C – 40 pieces of 3” wood screws SCREWS
  • D – 4 pieces of 2×4 lumber, 36” long FRONT STRETCHER (This can be changed longer or shorter to suit your preference)
  • E – 1 pieces of 4×8′ panel ply or fiberboard, 3/4” thick TOP AND BOTTOM SHELF (Have your lumber yard cut this for you but make sure they cut the top and bottom board to specs, the left over piece will be shorter do to blade thickness.) This should rest on top of the 2×4 on the front, back and sides.
  • F – 40 pieces of 1 1/2 wood screws SCREWS

You can make your work bench larger by increasing (B),(D) and (E). By changing the width of the table only(D), by more than 23 inches you will need to increase (E) by purchasing 2 pieces instead of 1.

Work Bench Plans

Be Sociable, Share!